Release – Monday, 01 January 2018 – Start your 2018 year off with a bang! JOIN AR15GOA and become a member of AR-15 GUN OWNERS OF AMERICA. Memberships start at just $25 a year.
Click here to learn more:
The patent pending SMOOTHCAM system features a domed head, low friction cam pin and special upper receiver that offer ultra smooth operation. With its blended cam recess the UAR upper is machined from Billet 7075-T6 certified aluminum and milspec, Type3, Class2, Deep Black, Hardcoat Anodized.
The UAR is a precision machined upper with a special burnished bore that gives a compacted internal surface with a roughness average in micro inches of 16, as
opposed to standard bored or milled uppers that are 32-63, or higher. This reduces bolt carrier friction and creates a much smoother operation.
Barrel nut threads, bore and barrel extension surfaces are all machined in one operation so that they are perfectly concentric and perpendicular to the barrel and fixing assembly.
The cam pin recess has been carefully designed with a smooth surface that flows into the main reciprocation channel. This allows our specially designed radial, domed head cam pin to move with the minimum of wear against these internal surfaces.
The CP-R360 Cam Pin has no moving parts to break or lock up, so unlike roller systems it can never fail.
Machined from 17-4 PH Stainless Steel and hardened to H900 (40RC) it is finished with a super smooth Melonite process. The cam pins circular head has a single flat face machined into it so that it can be inserted into any bolt carrier without having to remove the gas key.
The unique domed head allows the cam pin to operate in a completely different position to a traditional pin, with the radius of the head curving away from the receivers internal surface, rather than forming a hard or sharp edge on its upper corner that causes wear.
Used in conjunction with our UAR upper and you have a complete, ultra smooth, low friction, minimum wear system.
James Madison Tactical LLC as of August 21, 2014 has received the ever so important determination letter from the ATF/FTB that our JMT 80 lower receiver is not classified as a firearm as defined in 18 U.S.C. 921(a)(3). The examination states that manufacturing operations have not been performed in the fire control section of the receiver blank and that the casting has not reached a point in the manufacturing process to be classified as a firearm.
Now there is a polymer/composite 80% lower receiver you can purchase with confidence, guaranteeing when you purchase that by no means is it considered a firearm and in fact complies with the gun control act of 1968. It is urged that before ordering any 80% lower receiver that you verify the manufacturer has been approved by the ATF/ FTB and meets this compliance. The 80 lower receiver manufacturer should be able to furnish you with a copy of their approval letter.
James Madison Tactical, LLC