Available on backorder
- 16′ Heavy Barrel 1:8 twist
- 416R Stainless Steel Barrel
- Chambered in .223 Wylde (shoots both 5.56 & .223)
- Carbine Gas Setup
- 0.750 diameter for Gas Block
- Spiral Flutes
- .072 Gas Hole diameter
- M4 Feed Ramps
- MOA As Tested By BCA: .550″
This is a premium grade 16″ Stainless AR-15 Heavy Barrel.
These premium barrels are renowned for their deep, crisp, and consistent rifling and extreme accuracy. When it comes to AR-15 barrels these stainless beauties are the granddaddy of them all. 1 in 8 twist, Spiral fluted barrel, gas port drilled and set up for carbine length gas system and threaded for any standard AR-15 compensator. .750 gas block size, .072 gas port diameter. Barrel Extension in rear with feed ramps ready to install into any standard AR receiver. Barrel is chambered as .223 Wylde therefore properly chambering either commercial .223 Remington or 5.56 Nato rounds.
All parkerized barrels start with 4140 Gun Barrel quality steel. Heat Treated and Stress Relieved to a hardness of Rockwell C 28-32. Or we use the 416 Gun Quality Stainless Steel for our Stainless Steel Barrels.
These barrels are manufactured on modern CNC equipment to completely machine the barrel. We drill, ream, rifle, turn, chamber ream, pin the Barrel Extension, drill the gas hole, and mill the flutes, all on late model CNC Equipment. The Barrels are manufactured under the ISO 9002 Quality System, and each barrel goes through a Final Inspection before shipping.
Only logged in customers who have purchased this product may leave a review.